Networking hardware supplies

Core to edge. Sourced, supplied, deployed.

Routers, switches, servers, PON and fibre — from the brands operators actually run, procured through supplier relationships we have already built, and installed by the team that will support it afterwards.

Request a quote Browse categories

5Categories supplied

12Vendor brands

1–2 daysTypical deployment

End‑to‑endSource, supply, install

Right part, first time

Our consultants specify the equipment before you buy it, so the box that arrives is the one the design actually needs.

Sourcing that lands

An established supplier network means timely delivery and cost-effective procurement, not a quote that expires before stock appears.

Installed, not just shipped

We rack, configure and commission — MikroTik, VPN, routing and OLT provisioning included.

Supported afterwards

The team that deployed it is the team that monitors it. Remote diagnostics, patching and proactive maintenance.

01 — Core network

Core routers & switches.

The equipment your whole network depends on — specified for the throughput, port density and redundancy your traffic profile actually calls for.

Core and edge routers, aggregation and access switches, and the optics to connect them. We supply across the vendors operators in this region standardise on, so you are not forced onto a single platform.

MikroTik
Huawei
Juniper
Cisco
Tejas

Routing, VPN and MikroTik configuration services are available alongside supply — see server & network management.

Front panel of a 1U rack-mount core router with eight SFP+ uplink cages, eight Gigabit RJ45 ports, console and management ports, and PWR, SYS, ALM and FAN status indicators — Core router — SFP+ uplinks, GE access, out-of-band management

Front panel of a 48-port managed Gigabit switch with four SFP uplink cages and per-port link activity indicators — Managed access switch — 48 × GE with SFP uplinks

Close-up of SFP transceivers and cyan fibre patch cables connected into a rack-mount switch — SFP uplinks and structured patch cabling — the same standard we specify and install for customer racks.

Rack server — hot-swap bays, redundant power, out-of-band management

02 — Compute

Servers.

Rack and tower servers for virtualisation, databases, billing platforms and everything else that has to stay up.

Specified around the workload rather than a catalogue line: CPU and memory sized to the application, storage sized to the retention you actually need, and redundancy where downtime would cost you.

HP
Huawei
Dell
Lenovo

Prefer not to own the hardware? We also run managed cloud servers and storage.

03 — PON / FTTH

OLTs, ONUs & OLT cards.

Everything the passive optical side of an FTTH build needs — chassis and pizza-box OLTs, the line cards that populate them, and the ONUs that terminate at the subscriber.

OLTs — chassis and fixed-configuration, sized to your port count and growth plan
OLT cards — PON line cards, uplink cards and control cards for expansion or spares
ONUs — subscriber terminals for residential and business connections

VSOL
Huawei
ZTE

Provisioning and OLT management are part of the deployment, not a separate project.

Chassis OLT populated with three PON line cards, an uplink card with 10 and 40 gigabit optics, a control card and two redundant power supply modules — Chassis OLT — PON line cards, redundant uplink and control, dual PSU

We are building our own ONU. The ACS FiberBox X1 is a premium low-profile desktop ONU currently in development — Wi-Fi 5, SC optical, dual Gigabit LAN and USB-C power. See the concept specification.

OLT chassis we supply

Common models, ready to spec.

MA5800-X7

Huawei

MA5800-X15

Huawei

MA5683T

Huawei

ZXA10 C600

ZTE

ZXA10 C620

ZTE

ZXA10 C650

ZTE

ZXA10 C300

ZTE

ZXA10 C320

ZTE

OLT line cards

Spares and expansion boards.

Family noted where a card is specific to an older chassis generation.

GPHF

Huawei — 16-port GPON board

X2CS

Huawei — 2-port 10GE uplink board

GPBD

Huawei — GPON board (MA5600T family)

GPFD

Huawei — 16-port GPON board (MA5600T family)

MCUD1

Huawei — control board (MA5600T family)

GTGH

ZTE — 16-port GPON board (C300/C320)

GFGN

ZTE — GPON board (C600 family)

GFGH

ZTE — GPON board (C600 family)

04 — Cable & passive

Fibre optic and communication cable.

Aerial, underground and in-building — supplied by the drum and specified for the span, the environment and the load it has to survive.

ADSS

All-dielectric self-supporting. Long aerial spans with no metallic element — safe alongside power lines.

Drop cable

Figure-8 and flat FTTH drops for the last span into the subscriber premises.

OPGW

Optical ground wire for transmission infrastructure — earthing and fibre in a single stranded cable.

CAT6

Structured cabling for in-building runs, racks and horizontal distribution.

Also supplied

Communication cables
Patch cords & pigtails
Splice closures & ODFs
Splitters & distribution boxes
Splicing tools & consumables
Poles, clamps & aerial hardware

Not sure what the route needs?

Span length, terrain, existing infrastructure and environmental conditions all change which cable is right — and getting it wrong is expensive to undo. Our consultancy team surveys the route first and specifies from the survey.

Site survey & feasibility

05 — Customer premises

CPE & subscriber equipment.

The equipment that ends up in your customer’s home or office — where the quality of your network is actually judged.

Alongside the ONUs we supply from VSOL, Huawei and ZTE, we are developing our own: the ACS FiberBox X1, a low-profile desktop ONU built for modern FTTH deployments.

See the FiberBox X1

ACS FiberBox X1 desktop ONU showing the SC optical port, two Gigabit LAN ports, reset button, USB Type-C power input and illuminated front light bar

ACS FiberBox X1 — concept render, in development.

Procurement

Send us the bill of materials.

Or send us the design and we will build the BOM for you. Either way you get a straight quote with lead times, and the option to have us install it.

Request a quote Call +254 758 304 170